Your behavior appears to be a little unusual. Please verify that you are not a bot.

Tag: Martin Sprocket and Gear

Photo: Gabe Beaird/iStock / Getty Images Plus/Getty Images

Reflecting on 2020, what’s happening out there and more

November 9, 2020By Kevin Yanik

Decades from now, we’ll look back on 2020 as one of the most turbulent years of our lives. And yet, aggregate producers are plowing through the year with a tremendous amount of grit and success.

Says PPI’s Jeff Poe: “You can have a conveyor track perfectly in the center for years, and then all of a sudden it will want to track to the left or the right.” Photo: P&Q Staff

Get your conveyor belts on track

November 6, 2020By Kevin Yanik

Veteran equipment suppliers share their experience to ensure your belts run where they should.

While aggregate production may be a bit down this year, top producers remain profitable by keeping a watchful eye on their spending. Photo: P&Q Staff

When equipment purchasing might pick up

September 1, 2020By Kevin Yanik

Big spending on equipment skidded to a halt earlier this year, but signs are emerging that capex may pick up steam sooner than later.

According to Martin Sprocket & Gear, one key advantage of an impact bed is excellent transfer point sealing. Photo: Martin Sprocket & Gear

Martin: Impact beds offer distinct benefits within load zones

March 25, 2020By Kevin Yanik

According to Martin Sprocket & Gear, which showcased a heavy impact bed at ConExpo-Con/Agg 2020, the equipment is an alternative to conventional impact idlers.