Smiley Monroe Zip Clip

By |  November 16, 2018
Photo courtesy of Smiley Monroe

Photo courtesy of Smiley Monroe

Introducing the mechanically fastened replacement conveyor belt, Zip Clip®.  With an easy-to-fit push-in connecting pin, Zip Clip® is a fast, safe and secure installation method developed specifically for Aftermarket spares.

Once fitted and tensioned, Zip Clip® belts can be run immediately. Even environmental conditions, such as high humidity, dust, sand or extreme cold will not adversely affect installation. Keeping a Zip Clip® belt close to your most critical conveyor will maximise uptime in the event of a breakdown.

Features

  • Get back up and running within 30 minutes – no need to wait on a splice team
  • Maximize uptime!  Zip Clip® belt installation is 3.5 hours faster than cold vulcanising & 6 hours faster than hot vulcanising*
  • No specialist training or equipment required
  • READY TO RUN. Once fitted and tensioned, Zip Clip® belts are immediately ready to run
  • PU BELT CLEANER FRIENDLY
  • Ideal for smaller tail pulleys
  • Reusable, Armoured connecting pin can be easily removed, allowing Zip Clip® belts to be reused
  • BELT TYPES – Zip Clip® belts available as both flat and chevron
  • Suitable for use with overband magnets but not metal detectors

**Zip Clip® installation time savings are based on having a skilled vulcanising team on site with belts already prepared for vulcanising.

www.smileymonroe.com

This article is tagged with , , , and posted in Equipment of the Day

Comments are closed