Mincon MQ Range of DTH hammers

By |  June 14, 2016

Mincon has launched its new MQ range of DTH hammers that provide increased performance in most drilling conditions. The drill bit shanks that are used with the Mincon MQ range are accepted industry standards with their foot valves removed. The MQ40 hammer uses the TD40 shank, the MQ55 uses the QL50 shank and the MQ60 and MQ65 uses the QL60 shank. The Mincon MQ68 is a large bore production hammer for drilling 6 1/4 in. (159mm) to 7 1/2 in. (190mm) holes and uses the QL60 shank with no foot valve.

www.mincon.com

This article is tagged with , and posted in Equipment of the Day

About the Author:


Comments are closed